Industrial Pumps

An End Suction Pump is a type of Centrifugal Pump where the suction is axial and the discharge is at 90 degrees to the suction. Many designs have a centre line discharge to comply with worldwide or regional standards.

The offered dewatering mud pump is commonly used for removing water from the wet soil and mud. Our supplied dewatering mud pump is made from superior grade raw materials, procured from very trusted vendors in the market. The offered dewatering mud pump is very affordable and cost effective in price.

An End Suction Pump is a type of Centrifugal Pump where the suction is axial and the discharge is at 90 degrees to the suction. Many designs have a centre line discharge to comply with worldwide or regional standards.

Features

• Designed for underwater applications - No need of priming and foot valve.
• Can also be used for out of water applications.
• Easy installation- Foundation and installation platform or pump house not required.
• Can withstand wide voltage fluctuations from 200-440 Volts.
• Water shower arrangement for out of water applications.
• Designed to prevent overloading and motor burning.
• Dynamically balanced rotating parts to ensure minimum vibrations during running.
• Replaceable wearing parts and hence longer life.
• Easy maintenance and spares availability.

Applications

• Submerged pump in Fountains, Wells, Sumps and Water tanks.
• Water supply for domestic use in high rise Apartments, Buildings and Hotels.
• Gardening and sprinkler/conventional irrigation.
• Industries, for clear water handling.

Features

• Designed for underwater applications - No need of priming and foot valve.
• Easy installation - Foundation and installation platform not required.
• Can withstand wide voltage fluctuations from 160 - 260 Volts.
• Non overloading power characteristics - No fear of motor burning.
• Dynamically balanced rotating parts ensure minimum vibrations.
• Replaceable wearing parts and hence longer life.
• Easy maintenance and spares availability - Needs only one spanner for maintenance.

Applications

• Water supply for fountains, sump and water tanks.
• Water supply for domestic use in apartments, buildings and hotels.

Features

• Can Withstand Wide Voltage Fluctuations.
• From 180 To 240 Volts For Single Phase
• From 300 To 440 Volts For Three Phase
• Models Are With ‘8’ Class Of Insulation And Ip 44 Protection. Models
• In Three Phase A.C. Power Supply Can Be Supplied With Ip-55
• Protection On Request.
• Designed To Prevent Overloading And Motor Burning.
• Long Life - Due To Replaceable Wearing Parts.
• Dynamically Balanced Rotating Parts Ensure Minimum Vibrations.
• Easy Maintenance And Spares Availability.

Applications

• Priming Of Large Pumps.
• Evacuation Of Airfrom Suction Pipes And Chambers.
• General Applications : Drying, Evaporation, Distillation, Filtration,
• Sterilisation, Condensation Degasification, Sucking Gases.
• Specific Applications : Twist Drilling Machine, Removing Water From
• Pulp Layer, Labeling, Bottle Filling De-Odorising.

Features

• Efficiency At Par With Internationally Available Pumps.
• Quick Automatic Self-Priming Action. Designed For Automatic Air Release During Priming.
• Non-Clogging Impeller To Handle Suspended Solids.
• Repairs Possible Without Disturbing The Pipe Connection Due To Back Pull Out Design (Except Sp'o').
• Portable, When Fitted On Trolley/Trailer.
• Suitable For Engine/ Motor.
• No Need Forfoot Value.
• Long Life - Due To Replaceable Wearing Parts.
• Dynamically Balanced Rotating Parts Ensure Minimum Vibrations.
• Easy Maintenance And Spares Availability.

Applications

• Marine-Pumping Waterfrom Docks, Ports, Vessels.
• Industrial : Petroleum Products, Chemicals, Effluents, Sewage, Ash-Water Etc.
• Civil Construction : Dewatering Foundation, Trenches And Pits.
• Mobile Machinery: Cooling Waterfor Marine Engines And Shovels.
• Public Utilities: Sewage Pumping.

A split casing pump is a device with a casing split perpendicular or radially across the shaft. This design allows easy access to the pump's internal parts for maintenance. The term “split casing pump” is commonly used to describe a type of double suction pump or pipeline pump designed to produce high-volume flows.

Features

• Can Withstand Wide Voltage Fluctuations.
• From 180 To 240 Volts For Single Phase.
• From 300 To 440 Volts For Three Phase.
• Efficiency At Par With Internationally Available Pumps.
• Quick Automatic Self-Priming Action. Designed For Automatic Air Release
• During Priming.
• Non-Clogging Impeller To Handle Suspended Solids.
• Models Are With ''b'' Class Of Insulation And Ip 44 Protection. Models In Three
• Phase A.C. Power Supply Can Be Supplied With Ip-55 Protection On Request.
• Repairs Possible Without Disturbing The Pipe Connections Due To Back Pull Out
• Design (Except Sp ''0''m).
• No Need For Foot Valve.
• Long Life - Due To Replaceable Wearing Parts.
• Dynamically Balanced Rotating Parts Ensure Minimum Vibrations.
• Easy Maintenance And Spares Availability.

Applications

• Marine : Pumping Water From Docks, Ports, Vessels.
• Industrial : Pumping Petroleum Products, Chemicals, Effluents, Sewage,
• Ash -Water Etc.
• Civil Construction : Dewatering Foundation, Trenches And Pits.
• Mobile Machinery : Cooling Water For Marine Engines And Shovels.
• Public Utilities : Sewage Pumping.